1879 1890 Essays - Films, Ibsen Family, A Dolls House,

1879 1890 HENRIK IBSEN'S A DOLL'S HOUSE CONTENTS CONTENTS SECTION............................ SEARCH ON THE AUTHOR AND HIS TIMES............................. IDOLAUTH A Doll's House THE PLAY The Plot.......................................... IDOLPLOT The Characters.................................... IDOLCHAR Other Elements Setting...................................... IDOLSETT Themes....................................... IDOLTHEM Style........................................ IDOLSTYL Form and Structure........................... IDOLFORM THE STORY......................................... IDOLSTOR A STEP BEYOND Test and Answers.................................. IDOLTEST Term Paper Ideas and other Topics for Writing..... IDOLTERM Hedda Gabler THE PLAY The Plot.......................................... IHEDPLOT The Characters.................................... IHEDCHAR Other Elements Setting...................................... IHEDSETT Themes....................................... IHEDTHEM Style........................................ IHEDSTYL Form and Structure........................... IHEDFORM THE STORY......................................... IHEDSTOR A STEP BEYOND Test and Answers.................................. IHEDTEST Term Paper Ideas and other Topics for Writing..... IHEDTERM A DOLL'S HOUSE AND HEDDA GABLER The Critics....................................... IDOLCRIT Advisory Board.................................... IDOLADVB Bibliography...................................... IDOLBIBL AUTHOR_AND_HIS_TIMES THE AUTHOR AND HIS TIMES (IDOLAUTH) - On a chilly April day in 1864, Henrik Ibsen arrived at the docks in the Norwegian capital of Oslo (then called Christiania). The young man was a failure. The theater he'd run had closed, and none of his own plays were successful. He had a wife and a young son to support, but all his possessions had been auctioned off two years before to pay his debts. He'd applied for a grant from his native country, Norway, but was turned down. Disillusioned by his country and society, Ibsen, together with his wife and son, boarded a ship and left Norway, figuratively slamming the door behind him. Fifteen years later, a similarly disillusioned Nora Helmer would slam the door on stage at the end of A Doll's House, helping to change the course of modern drama. Ibsen had become disillusioned very early. In 1836, when he was eight years old, his wealthy parents went bankrupt. They were forced to move from town to a small farm. All of their old friends deserted them, and they lived for years in social disgrace. Although young Henrik appeared quiet and withdrawn, his deep, bitter anger at society would occasionally escape in the scathing caricatures he would draw or in tirades against young playmates. His sole happiness seemed to come from reading books and putting on puppet plays. Ibsen didn't like his own family any more than he liked the "proper" society that shunned them. His domineering father was an alcoholic, while his quiet mother found comfort in religion. This blend of overbearing husband and submissive wife makes repeated appearances in his plays, most notably in Brand, in A Doll's House, and in Ghosts, After he left his parents' home at sixteen in 1844, he never went back, even years later when he got word that his mother was dying. Hoping eventually to study medicine, Ibsen became a druggist's apprentice in Grimstad, a small Norwegian village. But he still felt like an outsider, a feeling that would dog him all his life and find expression in many of his plays. (It didn't help his social standing when he fathered an illegitimate son by a servant girl ten years older than he. Some feel that it was this unwanted child that reappears in many of his plays as a lost or murdered child. In A Doll's House, the nursemaid gives away her illegitimate child.) But Ibsen found he wasn't alone in his contempt for those who controlled society. He became friends with a boisterous group of young artists who specialized in political satire. By 1848, a spirit of political unrest was sweeping Europe. Rebellions against monarchy flared in many countries. This spirit of revolution was intoxicating for Ibsen and his friends. Royalty and aristocracy seemed on their way out; the people were coming into their own. Two years later, Ibsen moved to Oslo to attend the university but failed to complete the entrance examinations. He was so caught up in politics and writing, however, that he really didn't care. After all, modern society seemed to be at a crossroads, and the world offered infinite possibilities. But things began to go wrong. The revolutions of 1848 faltered and finally were crushed. Artists and politicians alike lost their idealism. The world of infinite possibilities didn't really exist. Years later, Ibsen would use the experiences of this period in his plays. Certain of his characters (like Nora in A Doll's House and Lovborg and

Free Essays on Frankenstien

In a series of letters, Robert Walton, the captain of a ship bound for the North Pole, recounts to his sister back in England the progress of his dangerous mission. Successful early on, the mission is soon interrupted by seas full of impassable ice. Trapped, Walton encounters Victor Frankenstein, who has been traveling by dog-drawn sledge across the ice and is weakened by the cold. Walton takes him aboard ship, helps nurse him back to health, and hears the fantastic tale of the monster that Frankenstein created. Victor first describes his early life in Geneva. At the end of a blissful childhood spent in the company of Elizabeth Lavenza (his cousin in the 1818 edition, his adopted sister in the 1831 edition) and friend Henry Clerval, Victor enters the university of Ingolstadt to study natural philosophy and chemistry. There, he is consumed by the desire to discover the secret of life and, after several years of research, becomes convinced that he has found it. Armed with the knowledge he has long been seeking, Victor spends months feverishly fashioning a creature out of old body parts. One climactic night, in the secrecy of his apartment, he brings his creation to life. When he looks at the monstrosity that he has created, however, the sight horrifies him. After a fitful night of sleep, interrupted by the specter of the monster looming over him, he runs into the streets, eventually wandering in remorse. Victor runs into Henry, who has come to study at the university, and he takes his friend back to his apartment. Though the monster is gone, Victor falls into a feverish illness. Sickened by his horrific deed, Victor prepares to return to Geneva, to his family, and to health. Just before departing Ingolstadt, however, he receives a letter from his father informing him that his youngest brother, William, has been murdered. Grief-stricken, Victor hurries home. While passing through the woods where William was strangled, he catche... Free Essays on Frankenstien Free Essays on Frankenstien In a series of letters, Robert Walton, the captain of a ship bound for the North Pole, recounts to his sister back in England the progress of his dangerous mission. Successful early on, the mission is soon interrupted by seas full of impassable ice. Trapped, Walton encounters Victor Frankenstein, who has been traveling by dog-drawn sledge across the ice and is weakened by the cold. Walton takes him aboard ship, helps nurse him back to health, and hears the fantastic tale of the monster that Frankenstein created. Victor first describes his early life in Geneva. At the end of a blissful childhood spent in the company of Elizabeth Lavenza (his cousin in the 1818 edition, his adopted sister in the 1831 edition) and friend Henry Clerval, Victor enters the university of Ingolstadt to study natural philosophy and chemistry. There, he is consumed by the desire to discover the secret of life and, after several years of research, becomes convinced that he has found it. Armed with the knowledge he has long been seeking, Victor spends months feverishly fashioning a creature out of old body parts. One climactic night, in the secrecy of his apartment, he brings his creation to life. When he looks at the monstrosity that he has created, however, the sight horrifies him. After a fitful night of sleep, interrupted by the specter of the monster looming over him, he runs into the streets, eventually wandering in remorse. Victor runs into Henry, who has come to study at the university, and he takes his friend back to his apartment. Though the monster is gone, Victor falls into a feverish illness. Sickened by his horrific deed, Victor prepares to return to Geneva, to his family, and to health. Just before departing Ingolstadt, however, he receives a letter from his father informing him that his youngest brother, William, has been murdered. Grief-stricken, Victor hurries home. While passing through the woods where William was strangled, he catche...

The ways children and adults may respond to media content that Essay

The ways children and adults may respond to media content that contains explicit material - Essay Example These programs show objectionable and socially offending content including promiscuity, violence, drug abuse and occultism among others. This paper examines the complaints that objectionable media content has generated, emphasizing on critical analysis of the linkage between the contents and the objections raised by the society. Complaints to objectionable content Various media contents have generated negative criticism from the society. Some of the complaints originate from particular segments of the society while others elicit widespread criticism. In a research study investigating the reactions of the society to objectionable media content, Stephenson (2007) identified religion, race, and culture in addition to sexual orientation as the major factors determining how particular media content is received in the society. In American society, the minority groups have been raising concerns about how their image is portrayed in the media. In the movie industry for instance Adler, et al( 2007) noted that most African American males play violent and vulgar roles that portray them as hardcore criminals with an inclination of abusing hard drugs. In addition, many television programs focusing on black people portray the negative side such as poverty, crime and chronic disease infection in addition to broken and unhappy families. These programs have recently fallen under heavy criticism because they hardly show achievements or positive side of the black people in the community. The negative media publicity of the minorities, especially in developed countries has been attributed by Bushman and Cantor (2003) as the leading cause of reinforcing crime, drug abuse and other social problems, among the minority groups. In addition, they promote racial prejudice, where a particular race is regarded with scorn, suspicion and mistrust. Besides negative depiction of African Americans, portrayal of people from East Asian countries such as Japan and china in the media is equally bias ed compared to white actors. A study conducted by Stephenson (2007) established that most movies with male actors from oriental countries portray them as extremely violent and cold hearted with exemplary martial arts skills. Similarly, female actors from these countries are portrayed as delicate, weak and sexually attractive. This perception creates an impression that Asian females are incompatible with their violent, cold hearted and inhuman counterparts in romantic relationships. Sexually explicit and pornographic programs are some of the most heavily criticized media content in all segments of the society. In extremely conservative societies and religious groups, media programs that broadcast scanty dressing or behavior with sexual overtone are not allowed (Adler, et al 2007). Pornographic content is considered as the epitome of sexual immorality in most societies. Currently, restricting access to pornographic materials to the young people is among the top priorities in most coun tries. Sexually explicit media contents are attributed to promoting promiscuity and other adverse sexual behavior, such as pedophilia, rape and homosexuality. Effect of objectionable content on behavior High prevalence of violent crime, promiscuity, drug abuse and other social disorders have been credited to the negative influence of

The Capital Buffer and Capital Planning-Banks Essay - 1

The Capital Buffer and Capital Planning-Banks - Essay Example According to this article, FINMA categorizes different financial institutions into different groups based on their total material goods, possessions under management, fortunate and required own funds. Pillar 2 describes the limits for capital buffers in line with categorization. The support sets the capital adequacy requirements in a digressive manner that depends on the size of the institution and its complexity. These limits described by this support include the capital ratio that is applicable to establish the capital adequacy of an institution. The other limit is the capital ratio that needs an immediate action according to the supervisory law. The pillar claims that all financial institutions need to improve the quality of its financial status the help to meet the capital adequacy target of the whole system. Another trait common to most of the financial institutions includes an inability to fulfill the capital buffer target. The author claims that an organization can be permitte d to fail to comply with the capital adequacy target upon lack of notification. These organizations are advised to inform the FINMA in advance. The company should also explain the date of meeting the compliance and the method of complying with the capital adequacy target.

Project Assessment Essay Example | Topics and Well Written Essays - 1500 words

Project Assessment - Essay Example Heseltine, the former deputy prime minister, criticized the cost-benefit analysis of the HS2 high-speed railway line. He even suggested that the expected cost of  £42.6 billion could be reduced by  £10 billion. The comment came after the heightened debate about the certainty of the estimated benefits of the HS2 project. Heseltine also pointed out that the analysis did not consider consequential growth in the project these included later expansion to connect London and Birmingham in 2026, and Manchester and Leeds by 2033. This attracted undying criticism from many quarters. However, the government was insistent that the benefits the project will bring outweighs the project’s cost. One of the latest criticisms was that the government overestimated the value of time that people travelling for business would save for short journeys. The assumptions at the time did not consider that a person could still work on transit using their laptops or other mobile devices. This has seen the time savings on business travel cut down by about a third (Mason & Watt 2013).

Esterification of 4-methyl-2-pentanol and Acetic Acid

Esterification of 4-methyl-2-pentanol and Acetic Acid Joseph Nuernberg Esterification of 4-methyl-2-pentanol and Acetic Acid by Reflux and Distillation and Characterized by Infrared Spectroscopy Abstract: The objective of this lab was to successfully synthesize an ester from an alcohol and acetic acid. This experiment used 4-methyl-2-pentanol with excess acetic acid to produce (1,3-dimethylbutyl) acetate as seen in Figure 1. The mixture of acetic acid with 4-methyl-2-pentanol and sulfuric acid was refluxed, extracted, distilled and identified using IR spectroscopy. The ester had a fruity smell when obtained. The mass of the final product was 0.582g which gave a 34.6% yield. The results obtained indicated that the final product attained was the ester (1,3-dimethylbutyl) acetate due to the similar bond groups of C=O and sp3 C-H. The reason why the percent yield was low was because the nature of the reaction itself formed ether and ester and some product was lost through extraction. For future experiments, the process must be done a lot quicker in order to ensure the least amount of product evaporates. Introduction: Often in chemical labs, esters are artificially synthesized in order to produce an imitation of a flavor. An ester can be synthesized by the reaction of an alcohol with a carboxylic acid. In this experiment, (1, 3,-dimethylbutyl) acetate was formed through excess acetic acid and 4-methyl-2-pentanol as seen in Figure 1. The limiting reagent in this reaction is 4-methyl-2-pentanol so the theoretical yield of the ester product is dependent on 4-methyl-2-pentanol. Figure 1: Reaction of 4-methyl-2-pentanol with excess acetic acid For this reaction, the reflux will be utilized. Heat is applied with a boiling chip, to allow the reaction to occur. The vapor rises and escapes from the round bottom flask and is then cooled by the water condenser. The vapor turns back into a liquid and drips back into the bottom flask. In order to remove certain compounds, the synthesis involved extraction to isolate compounds. The denser layer or the aqueous layer will be at the bottom and can be removed with a pipette. The product of ether and ester was distilled to isolate the ester because esters have lower boiling points than the ether. In distillation, the substance with the lower boiling point evaporates and reaches the water condenser. The cool temperature allows the vapor to change states from gas to liquid which forces the liquid to drip back down the into the Hickman head due to gravity. In this reaction, the (1, 3,-dimethylbutyl) acetate was isolated from an unknown ether by distilling into the Hickman head. An IR spect rum of the final product is conducted to determine the desired product by comparing the bond groups of the given values. If the IR peaks and bonds are the same as the given, then the purified product would be the ester. A percent yield will be calculated to assess the amount of ester produced. Procedure: First, obtain an empty round bottom flask and find the mass. Add about 1.5mL of 4-methyl-2-pentanol in the flask and reweigh. With the 3mL of glacial acetic acid added, add sulfuric acid with a boiling chip. Conduct reflux with the apparatus conducted in previous labs with a water condenser attached to cool the reaction. Heat the apparatus for 60 to 70 minutes. Cool the reaction mixture and while stirring, add 2-3 mL of 5% aqueous sodium bicarbonate until carbon dioxide formation ceases. Transfer mixture and shake hard. Remove the aqueous layer and repeat the separation technique two more times. Remove as much water from the organic layer by adding small amounts of sodium sulfate and let the reaction stand for 10-15 minutes. After a week, transfer the reaction with the ether and ester into a vial and conduct distillation. Conduct distillation for 15 minutes at around 180 to 200 oC. Obtain and mass the final product. Conduct IR of starting reactants and products. Clean up stations and calculate the percent yield. Results and calculations: Table 1: Table of masses during experiment Theoretical yield for (1,3-dimethylbutyl) acetate = 1.68g of Percent yield: x 100% x 100%= 34.6% IR: Figure 2: IR before distillation Figure 3: IR after distillation Table 2: Values of IR for ester (1,3-dimethylbutly) acetate after distillation Discussion and Conclusion: For this experiment, the ester (1, 3-dimethylbutyl) acetate was synthesized from acetic acid and 4-methyl-2-pentanol. However, this is not a one reaction pathway because of the tetrahedral intermediate prevalent in esterification. The addition of the acetic acid leads to a more reactive electrophile. This causes a tetrahedral intermediate in which there are two equivalent hydroxyl groups. Then one of the hydroxyl groups is eliminated, a process known as tautomerism. This then gives water and ester as the final products. The reaction was successful produced from reflux but problems arose during the second component of this experiment, distillation. The ester also had a very distinct fruity smell. This reaction is refluxed because heat acts as a catalyst for the reaction. In the reaction pathway, the temperature is increased, allowing more geometrical collisions with the products and requires lower activation energy. This can be seen as an example of the Maxwell-Boltzmann curve. This was done uniformly by using the aluminum block at around 110 oC. After reflux occurred, a distillation apparatus was used in order to purify the ester from the ether. The boiling chip was added in reflux and distillation in order to ensure that the reaction did not overheat and burn the reaction. Boiling chips are often made from carborundum (carbon and silicon) which are chemically inert and allows sharp edges for bubbles to form which will not overheat the system. The substances in the reaction are allowed to boil more calmly rather than rapid boiling causing splatter and ruining the experiment. The water condenser was used for both in order to cool down the reaction in order to prevent burning of the reaction and ensuring that the product in the vapor state turned back into liquid state. The reason why anhydrous sodium bicarbonate was added was to ensure that any leftover water was absorbed and the remaining layer contained only the organic compounds. This was done a total of three times to ensure that minimal water was left, but some of the product leaked when shaken. The purpose of distillation is to separate compounds based on their boiling points. The reaction mixture that contained ester and ether was to be distilled in order to obtain the ester in the Hickman head. However, after letting the reaction stand for a week, most of the ether evaporated and the mixture was mostly ester. This explains why during distillation, the mixture in the conical vial disappeared as most or all went into the Hickman head. This can be seen in Figures 2 and 3. The IR of before and after distillation have similar values, peaks, and the exact functional groups which indicates that the mixture contained only the ester. The IR spectroscopy of after distillation shows that there is a C=O bond around 1735.27 cm-1, and a sp3 C-H bond around 2959.19 cm-1 which indicates that the compound shown is indeed an ester and that the objective was met since ester do have C=O bonds around 1750 cm-1 and sp3 C-H bonds around 2900 cm-1 . Ideally, the distillation process should be us eful in isolating the pure product, by allowing the ester molecules to be in a gaseous phase. Equilibrium will be established and allows the molecules to form back into a liquid phase in the Hickman head, but in this experiment distillation was not necessary. This just caused more chances of losing the ester by not fully attaining all the liquid from the Hickman head or by evaporating. The results yielded a 34.6% yield which suggested that there were errors within the reaction. One major reason as to why the yield was low was because of the nature of the reaction itself. The ether and ester in the conical vial was left to stand for a week. Because the ether had a lower boiling point than ester, most or all of the ether evaporated due to high volatility at room temperature. In addition, the ester also has a high volatility but lower than the ether because of the structure and the strength of the intermolecular forces. The ester has two oxygen atoms whereas the ether has one oxygen resulting in lower van der Waal forces. The ether was created as a byproduct which affected the maximum amount of yield of ester produced. Therefore, not all the reaction occurred to form an ester because during that time there were compounds that hindered the maximum amount of yield formed by forming a pathway for the ether. This was from the sulfuric acid reaction mechanism to produce an ether. The sulfuric acid dissociates into a proton and a bisulfate ion which forms with the OH group of the alcohol. The alcohol’s oxygen is protonated which forms an oxonium ion. The ion decomposes to carbocation and water and the carbocation reacts with another alcohol group to form another oxonium ion. The ion loses a proton to stabilize and forms an ether. If a stronger alcohol, perhaps 1-hexanol was used, a higher yield would be attained because the stronger intermolecular forces allows the reaction to have lower volatility and the ester and ether formed would also evaporate less. Because there are weaker van der Waal forces in the (1, 3-dimethylbutyl) acetate because of the lower carbon chains, more of the product was evaporated and lost. In order to ensure that a higher yield is attained, the reflux and distillation process must be done back to back or a lot quicker before the ester and ether evaporates at room temperature. Also an alcohol with a longer carbon chain s hould be used as stronger intermolecular forces allow more ester to form. While transporting the organic layers and further extraction, some of the product was lost. Even though this source of error is minimal, there were some product lost along the way by transporting through vials which affected the yield of the final product. Reflux is an effective technique that allowed Fischer esterification to occur. Distillation is a very useful technique, but should not be relevant when one of the substances evaporates due to high volatility. For future experiments, the reaction must be done much quicker in order to ensure that the least amount of ether and ester evaporates and is lost throughout the process and more precise instruments can be used to extract the organic layer. IR should still be used to discern the identity of the product. Because of the nature of the reaction itself, a yield close to the theoretical is very difficult to attain, a realistic approach would be around 60% yield. Work Cited: MSDS of (1,3-dimethyl butyl) acetate. http://www.chemicalbook.com/ChemicalProductProperty_EN_CB8373308.htm (accessed November 7, 2014). MSDS of 4-methyl-2-pentanol. http://www.sciencelab.com/msds.php?msdsId=9926088 (accessed November 7, 2014). Padias, Anne.Making the Connections. Hayden McNeil, 2011.

Feminine Perspective within Othello :: Othello essays

Feminine Perspective within Othello  Ã‚        Ã‚  Ã‚   In William Shakespeare’s tragic drama Othello, the male characters far outnumber the female ones. This may tend to cause the feminine viewpoint to be shortchanged. Let’s not let that happen – by consideration of same in this essay.    In the essay â€Å"Wit and Witchcraft: an Approach to Othello† Robert B. Heilman discusses involvement in the play by Emilia, the wife of Iago:    Emilia’s picking up the handkerchief helps advance the action by contributing to Iago’s deception of Othello, but it is also relevant to her character and to Shakespeare’s conception of the modes of wifely devotion and marital relationship (not to mention its relations by contrast with actions of Desdemona and Bianca and of Emilia herself later). (330)    It was Emilia’s gift of the decorated kerchief to her husband that set up Desdemona for murder. Helen Gardner in â€Å"Othello: A Tragedy of Beauty and Fortune† talks of Emilia’s outlook on things:    Emilia’s silence while her mistress lived is fully explicable in terms of her character. She shares with her husband the generalizing trick and is well used to domestic scenes. The jealous, she knows,    are not ever jealous for the cause But jealous for they are jealous.    If it was not the handkerchief it would be something else. Why disobey her husband and risk his fury? It would not do any good. This is what men are like. But Desdemona dead sweeps away all such generalities and all caution. At this sight, Emilia though ‘the world is a huge thing’ finds that there is a thing she will not do for it. By her heroic disregard for death she gives the only ‘proof’ there can be of Desdemona’s innocence: the testimony of faith. For falseness can be proved, innocence can only be believed. Faith, not evidence, begets faith. (145)    At the outset of the play only the male perspective is given: Iago persuades the rejected suitor of Desdemona, Roderigo, to accompany him to the home of Brabantio, Desdemona’s father, in the middle of the night. Once there the two awaken the senator with loud shouts about his daughter’s elopement with Othello. In response to the noise and Iago’s vulgar descriptions of Desdemona’s involvement with the general, Brabantio arises from bed. With Roderigo’s help, he gathers a search party to go and find Desdemona and bring her home.

Vying for Patients, Hospitals Think Location, Location.

INTRODUCTION. Hospitals are health care institutions that are normally located in areas that are densely populated. There are over 17,000 hospitals in the whole world. In accord with the original meaning of the word, hospitals were originally â€Å"places of hospitality†, and this meaning is still preserved in the names of some institutions such as the Royal Hospital Chelsea, established in 1681 as a retirement and nursing home for veteran soldiers. (http://en. wikipedia. org/wiki/Hospital#General) In general, hospitals are normally located in areas where they are other major hospitals as a way to acquire materials at low transportation costs. Unlike other businesses like franchises like McDonalds that would prefer to be in an area where there are no other fast food outlets, hospitals enjoy the benefits of being near other hospitals not only in terms of supply of raw materials but also to acquire bigger market shares. Most hospitals are specialized to include trauma centers, rehabilitation hospitals, children's hospitals, seniors' (geriatric) hospitals, and hospitals for dealing with specific medical needs such as psychiatric problems, certain disease categories such as cardiac, oncology, or orthopedic problems, and so forth. A hospital may be a single building or a number of buildings on a campus. Many hospitals with pre-twentieth-century origins began as one building and evolved into campuses. Some hospitals are affiliated with universities for medical research and the training of medical personnel such as physicians and nurses, often called teaching hospitals. Worldwide, most hospitals are run on a nonprofit basis by governments or charities. Within the United States, most hospitals are nonprofit. (http://en. wikipedia. rg/wiki/Hospital#General)? 1. How can sales market share and profit be optimized for entire set of locations? A sale is the act of selling a product or service in return for money or other compensation. Market share is the percentage of a market (defined in terms of either units or revenue) accounted for by a specific entity. Optimized is to make the best or most effective use of (a situation, opportunity, or resource). Sales market share can be optimized through both internal and exter nal adaptations which would include; I. Benefits of the location of competitor’s proximity. Hospitals unlike other franchise companies enjoy many advantages of competitors being located near each other like; a. Reduced transport cost by suppliers. Medical supplies companies are normally located near hospitals and the proximity between hospital and supply reduces transport costs which in turn reduces the over roll costs. This advantage can help the hospital optimize sales through reduced prices for medical care and also maximize profits through reduced costs. b. Specialization. Hospitals normally specialize for example trauma centers, rehabilitation hospitals, children's hospitals, seniors' (geriatric) hospitals, and hospitals for dealing with specific medical needs such as psychiatric problems (see psychiatric hospital), certain disease categories such as cardiac, oncology, or orthopedic problems, and so forth. In cases where a patient needs to be transferred from on medical facility to another unlike other franchise companies can share patients and proximity between hospitals helps with that especially in emergency cases. This helps in sales market share and optimization of profits. c. Facilities. Proximity of hospitals helps hospitals share facilities like operating theaters, x-rays which in turn helps in minimizing of costs. This is unlike any other business and this benefits the patient in terms of reduced prices for treatment and reduced costs for the hospital that the helps them increase sales and optimize profits. II. Internal adaptations and their benefits would include upgrading facilities like; a. Improvement of the quality of services by hiring of the best doctors and equipment can help in the optimization of market share, sales and profits due to the loyal customers that keep coming back for more services. . Accessibility. Easy access of the hospital in terms of near main transportation routes and stations improves on sales and profit optimization because patients are able to be delivered to the hospital easily especially in times of an emergency. c. Customer friendly. The friendliness of the doctors, nurses and staff to patients not only helps in the sales market s hare and profit optimization but research shows that friendly doctors and nurses helps in the faster recovery of patients. d. Advertising. Research shows that the more advertising is done for a service or product provider the more increase in sales there is. This in turn leads to the increase in the market share and optimization of profits. e. Avalabitility of parking is one of the most important facts for any company especially hospitals because when there is an emergency ambulance cannot be bothered on finding parking and need places with enough parking space. f. Building and leasing costs. This is an important factor for most companies to minimize overall cost to offer lower prices to customers and also optimize profits but for hospitals this is of little relevance because good qualities building in good locations don’t come cheap. g. Upgrading facilities in hospitals can include acquiring of newer equipment like imaging equipment, physical therapy equipment, and so on. Now updated medical equipment is most important in the health care business because as patient needs keep changing so does the equipment. Unlike other businesses like food businesses, the health care business is one of those businesses that require constant upgrading especially when it comes to the equipment. h. Expanding some sites of hospitals requires expanding the services to provide more health care services like dental care, Optic care, and physiotherapy and so on. This will help in the handling of a wider range of patients with different health care needs which will help in the acquiring of a larger market share and optimize profits. 2. What potential sales do you believe can be realized from each solution suggested? a. Emergency patients are some of the potential sales that could be realized from both enough parking space and accessibility proved by good location near major transport stations and major roads. b. Loyal customers and patients can be realized from friendly doctors and nurses and also high quality services provided by the staff. . Advertising can help in the making of potential clients who in case of hospitals are virtually human being aware of the services the hospital provides for example; American Hospital in Dubai that advertises in Dubai international airport making all the passengers who go through Dubai airport know about their services. 3. Where, in each case, should outlets be located to optimize market share, sales and profits without negatively impacting on other outlets? a. In some cases hospitals lose market share when there are too many hysicians, medical suppliers and other healthcare providers within the community, and for that reason one may even pay top dollar for a less competitive environment especially in a community with no duplicative services. This can help in the easy domination of the market share especially if it’s the only hospital providing those services which will in turn optimize profits. In some other cases locating near other hospitals as discussed earlier helps in the reduction of transport cost. So with this factor one must weigh the benefits of locating away from other hospitals versus locating near other hospitals. b. The physical facility in terms of building is an important aspect in consideration of the location of a hospital. Depending on the kind of services the hospital wants to provide the building facilities must be conducive enough to accommodate the equipment to be used in the providing of those services. This will greatly impact the quality of services provided by the hospital that will help in the acquiring of larger market share and optimize profits. . The geography and demographic of the hospital’s location may plays an important role in market share and profit optimization. The hospital industry is highly regulated and as such is vulnerable to government reimbursement. For this reason, a highly profit hospital will likely have a growing pool of commercially insured patients. So a hospital may rather locate itself in neighborhoods’ of high incom e earners because they are the ones who are likely to have both the money and the insurance to pay the medical bills. This will greatly help in profit optimization because this will mean less patients receiving services on credit but rather more patients paying cash at hand. d. Traffic volumes are also an important factor in locating of hospitals. The less traffic an area has is an added advantage in the location of a hospital because of the need for emergency clients to be able to reach the hospital for a required service in the least time possible. This will help in the securing of the market share that has emergencies hence optimizing profits. e. Customer access in terms of a hospital being located near bus stations and main transport routes is another important factor because it helps customers to reach the hospital for the services it has to offer easily. This will help the securing of a larger market share hence optimizing profits. f. Big enough parking is also an important factor in locating of hospitals because in cases of emergencies ambulances need to have ready parking at all times in order to minimize the time in takes to take the clients to inside the hospital to receive their required services. In cases of mass accidents or hazards the state or district normally has recommended hospitals in such cases because of some of these factors. 4. What probable effects would there be on market share, sales and profits if a competitor located nearby? a. If the competitors are providing the same service for example child pediatrics, dentistry plastic surgery and so on, it can be a negative impact. This is so because if a hospital is located in an area where other hospitals are all providing the same service that would mean a reduced market share for each hence a reduction in sales and profits. b. In cases where hospitals in the area are providing different services is can be an added advantage because of the proximity between supplier, customer and service provider. Some hospitals recommend other hospitals in case a customer needs another service that hospital doesn’t offer. In that way proximity is important for both the hospital in terms of maximizing sales but also for the customer in terms of reduced transport costs to go and receive that service. CONCLUSION. Location, location, location is a very important or if not the most important factor in the success or the failure of a business. The factors that will determine the success or failure of a business will depend on what kind of business, whether is profit or nonprofit business one wants to set up and the kind of service or product that business intends to provide. Some businesses require being located near the customer, for example fast food franchises while other donot even need to be located near the customer like communications service providers. For hospitals location is important depending on what kind of service they plan to offer and what target market is intended. Is it a charity hospital for low income earners or is it a profit hospital for high income earners. But the reputation of a hospital is also a very important factor for example ‘JOHN HOPKINS HOSPITAL’ where with such a high demand for their very high quality specialized medical services, they can afford to provide both charity services to low income earners and also exclusive services for high income earners. So in efficient location of a hospital they many factors to be examined but even more importunately the aim of the hospital.

Mosaics and Islam Culture

The Mosaics' Importance to the Islam People Islamic mosaics have had, and still have a great part in Islamic culture. Traditional mosaics had many uses in the Islamic World. They were very detailed in their patterns and designs, and had great religious meaning to the Muslim people. Mosaics had different uses in the Islamic World, as they do still in modern life. Normally, mosaics were used for decoration of mosques. They were sometimes used also for pottery. The great Mosque of Damascus has amazing mosaics decorating it and adding even more splendor and beauty to its design.The patterns and designs on mosaics are important and of great significance. The designs often had floral images and were very geometrical. Grids were put down on hard backings to make sure of exact measurements. Beads and tiles were used; calligraphy was often seen as well on mosaics. Mosaics can have great meaning to Muslims. The Great Mosque of Damascus has a mosaic on its walls that shows a paradise. Nature an d scenery is often displayed on mosaics; these scenes show meaningful places. Humans and animals were banned from being displayed on mosaics and abstract colors were shown often.Sayings, meaningful words, and verses from the Qu’ran, the sacred book of the Muslims, were often seen. Mosaics are a great part of Islamic culture because of its many uses, detailed designs and its great meaning to the Muslim people. My mosaic fits into and connects to Islamic art and culture because it is detailed, has meaningful words and is very geometrical. Beads were used to create my mosaic. The beads are in precise locations and the Arabic words are exact. The colors correspond with Islamic art as well.The Arabic words on either side of my template mean â€Å"Arabic Language† and are completely legible. These words represent the importance of Muslims learning Arabic. My mosaic is in the shape of an octagon, and is symmetrical, as are most Islamic mosaics. A large grid was put down on a hard foam core backing to help make the shapes more accurate. My mosaic connects to Islamic culture and traditional mosaics because of the detailed design fitting in with Islamic designs. It has words that mean something to Muslim people, and is exact and geometrical.

Quaker Delegations essays

Quaker Delegations essays The Quaker delegations of the 1790s were a time in American history that caused much havoc between the leaders of the north and the south. These delegations called for the federal government to immediately end the African slave-trade. The disagreements caused by the Quaker delegations illustrate three critical constructs that were prevalent during this time. One of three critical constructs illustrated within Elliss The Silence is institutional racism. Institutional racism uses the power of an institution to overtly or covertly oppress a socio-racial group. In the 1790s, the United States constitution prevented the federal government [from tampering] with the slave trade during the first twenty years of the nations existence. Therefore, the African slave-trade could not end until 1808. This example of institutional racism illustrates the American Governments push to brand and oppress Africans by treating them as property. Another historical example of institutional racism occurred as late as the 1920s in the south. When blacks were freed from slavery, many moved to the north. However, the southern black population was still large. During this time, much of the black population worked as sharecroppers, who suffered economical abuse from their white employers [winding up] with very little earnings. This historical occurrence qualifies as institutional racism because when black sharecroppers attempted to challenge their landlords, southern laws always favored landlords in disputes leaving blacks at the mercy of their landlords decisions. A second social construct that occurred during the Quaker delegations is cultural racism which overtly or covertly oppresses a socio-racial group through the cultural norms of a society. While the Quaker delegations were heavily discussed the question as to what would be done with freed s...

Industrial Design History Essay Example | Topics and Well Written Essays - 500 words

Industrial Design History - Essay Example The chair was made of walnut and leather. In addition, it was stamped and got gilt decoration. The chair was given to Philadelphia Museum of Art as a gift from the Preservation society stationed in Newport County. The chair was part of dining room furniture that was commissioned by George Peabody Wetmore for his home in New Port Rhode Island. The Armchair was designed in 1898 by Gustav Serrurier-Bovy. Gustav Serrurier-Bovy was a Belgian born in 1858. He died in 1910, but created a lot of works during his short life. In 1898, he managed to make an Armchair that was a depiction of the art Nouveau style that existed at that time. Art Nouveau style thrived between 1895 and 1920. The chair also owes much more to the Vernacular style that existed in England around the late nineteenth century. Art Nouveau style had a number of elements. Art Nouveau was characterized by a lot of graceful, sinuous lines. These lines were flowing and rarely angular. Furthermore, the art Nouveau style was also characterized by a lot of violent curves. The rhythmic patterns of the curvey lines were characteristic of the given art style. The curvey lines connected the images in the art to beautiful items, like hardware and furniture. In addition, some elements, like organic subject matter, were included in the style. One would find plenty of vines, flowers, grass, seaweed, insects, leaves, and images of jewelry, architecture, windows and architecture. One can identify Art Nouveau style art and architecture by looking for some elements.

Plate Tectonics Research Paper Example | Topics and Well Written Essays - 1250 words

Plate Tectonics - Research Paper Example is composed of plates that are in motion with respect to one another and that the majority of the deformation associated with this motion is concentrated along the plate boundaries (Fichter, 2000). Back in 1968, Morgain provided an explanation that plate tectonics constitutes "a kinematic model which describes the relative motion between the rigid plates that make up the outer shell of Earth" (Morgan, 73). Practically, the relative motion between the plates is accommodated by seafloor spreading and the creation of new plates at ocean ridges, subduction of the surface plate at ocean trenches, and strike-slip motion at transform faults which allows plate motion without creating or removing surface plates. The motion of the continents is facilitated by the movement of the lithospheric plates, and this transport of the continents is referred to as continental drift. Plate tectonics on Earth has been determined to have been in operation for at least two billion years and may well have bee n in operation much earlier (Cawood et al., 5). theory, with its collisional orogenies and other episodic events, was in some wise dependent or interdependent upon "new catastrophism." That is, though plate tectonics largely relies upon uniformitarianism as a basis of understanding plate motion and subsurface processes, it nevertheless proffers catastrophes and other episodic events that proceed at rates greater than those existing between events. Examples include mountain building, various volcanic processes, and sea-level change resulting from mid-oceanic ridge formation. Between 1908 and 1912, Frank B. Taylor, American geologist, and Alfred Wegener, a German meteorologist and astronomer, working independently, proposed the idea that the continents were not fixed on the surface of the Earth but were slowly moving about. One point of Taylor's argument was that continental drift was needed to account for the folding and compression of the Alps and the Himalayas. Wegener was more influenced by the rough parallelism between the opp osing shores of the Atlantic and by evidence of climatic changes through geological time. Later Wegener proposed that all the Earth's land area was at one time "united in a single primordial supercontinent, which he named Pangaea, from Greek meaning 'all land" (Hallam, 93). The continents had shifted, becoming increasingly separated through millions of years. He believed that the continent were made up of light-weight granitic rocks, which like giant ships driven through the heavier basaltic seas (Hallam, 95). Wegener looked upon the continents as flexible masses instead of rigid plates. Some of his work was in error, for example, the amount of time involved in continental drift. Alfred Wegener established a tradition in geology and geophysics, according to which further development of theory of plate tectonics has been formed within the scientific debate over the ideas of stationary continents and continental drift. For instance, Hallam commented that "interpretation of how science